English
  BONAV Home
Products
SATELLITE Module Family Software Solution
Anti-JACK
Print
  卫星模块系列
  嵌入式GPS模块
  组合GPS模块
  授时GPS模块
  高精度GPS模块
  GPS/GLONASS模块
  中国北斗OEM板
  终端产品系列
  工业GPS授时终端
  工业GPS终端
  配件
  GPS 天线
  GPS/GLONASS天线
  北斗天线
  GSM 天线
  CDMA 天线
  3G 天线
  组合天线
  RF 组件及连接器
   
 
 
ANTI-JACK(Anti Jammer)
 
 
 

GPS jammer "detect and report system" integrated into GPS module

Overview
Anti-JACK™ (Anti-Jamming Assessment Command Feedback), is an advanced GPS jammer detect and report system integrated within EM5J and compatible GPS module. Upon GPS jammer detected, the GPS module will send both a hardware level voltage high signal (for use with security system such as car alarm) and proprietary protocol via UART Tx (for warning via external GSM/GPRS modem).
Background
Even though GPS is depended by millions worldwide for its positioning and timing capabilities, GPS signals, after traveling through 20,000 kilometers of unpredictable atmosphere, are weak and prone to be interrupted by the simplest GPS jammer. With the rapid increase in the availability of low-cost, highly illegal GPS jamming devices, there exists a major security hole that compromises the safety of traceable assets or fleet workers.
Insurance companies around the world have reported a significant drop (up to 20%) in stolen vehicle recovery due to the use of GPS jammers.
Solution
Anti-JACK™ is a powerful, easy to use GPS jammer detection and notification system designed to enhance security with double-layer of protections. Anti-JACK™ is able to alert the security system embedded with EM5J GPS receiver on nearby GPS jammers through its customized NMEA protocol, or via direct voltage level with dedicated hardware pin out. System integrators can transmit the protocol to a cellular radio of his choice to remotely alert users, or have it connect to a physical alarm or siren that blast out loud when the system is tempered with.

Using its special circuitry, Anti-JACK™ is able to provide two levels of jamming sensitivity that can automatically adapt to different antenna setup (active or passive antenna). A total of 4 different GPS jammer detection mode is offered, including a smart power saving mode that reduces power consumption used by jammer detection when the GPS signal reception is above acceptable. Last but not least, all Anti-JACK™ settings can be easily toggled with simple packet commands.

 
 
 
  Software Solution
Distance Calculation
Geofencing
Last Position Retention
Magnetic Variation
One Sentence Output
Datum
Advanced Altitude Restriction
Multi-tone active interference canceller(MTAIC)
Power Saving Mode
AlwaysLocate™ (Advance Power Periodic Mode)
EPO in Flash
Embedded Logger function (LOCUS)
EASY™
Anti-JACK™
Timing Mode
A-GPS Support
Binary Protocol
Data Logger Solution