．Full hemispherical coverage due to quadrifilar helix antenna element.
．Built-in high gain, low noise amplifier.
．Input filter for thorough RF-overload protection.
．Right-hand circular polarisation (RHCP).
．High rejection of cross-polarised reflections prevents fading caused
by multipath propagation.
．5 V supply voltage (3 V respectively 12 V available on request) .
．DC supply via RF-connector.
．EMC tested to IEC 801 and IEC 255.
．Total design carried out to make the antenna withstand tough
environments.
．Comprehensive range of accessory mounting brackets available.
．Gain:>30dB
．Noisefigure:<3dB(incl.input filter).Typ.approx.3dB
．1dB Compression Point:>10dBm
．Selectivity:>20dB down at±100MHz
．Out of band attenuation
0.03- 1GHz:>40 dB down
2 -10GHz:>40 dB down
．SWR(output):<2.0
．Supply voltage:GPS:5±0.5V DC GPS4/3 V:3-3.5V DC GPS 4/12V:9-12V DC
．Current Consumption:Approx.44mA
．EMC:Full protection(IEC 801,IEC 255)
Mechanical
．Materials:Antenna dome:Weather-resistant low-loss plastic
．Antenna Colour:Marine white
．Insulation:Connector ground terminal is galvanically insulated from the mounting hardware
．Wind Surface:Approc.0.0072㎡
．Max.wind speed:200Km/h
．Wind Load:Approc.9.6N @150Km/h
．Temp.range:-50℃ to +70℃
．Connector:FME-male(pin)(can be supplied with TNC upon request)
．Suggested Downlead Cable <10m:RG58
10-30m:RG213
．Total Height:Approx.23cm
．Antenna DIA.:33mm
．Weight:Approx.150g Order Info.
Model List
Item
Model
Description
Part No.
1
GPS4
4.5V~5.5V
04053-2000
2
GPS4
3V~3.5V
04053-2010
3
GPS4
9V~15V
04053-2020
*For more detailed information, please click here.
